Проверка выключателя системы охранной сигнализации цилиндра замка двери

Применимость для следующих годов выпуска и кузовов: 2002, 2003, 2004

1.	Remove the door panel.

2.	Disconnect the 3P connector from the key cylinder switch.

3.	Check for continuity between the terminals. There should be continuity between the No. 2 and No. 3 terminals when the door key cylinder switch is LOCK position. There should be continuity between the No. 1 and No. 2 terminals when the door key cylinder switch is UNLOCK position.